Fault Code

Condition/Description

Resolution

F0

Board failure

Repair control board (also called ERC or clock)

F1

Board failure

Repair control board (also called ERC or clock)

F2

Oven temperature is too high

  1. Look for welded relay contacts on bake or broil relays. If this happens, repair oven control (also called clock or ERC)

  2. For SELF CLEAN models: check door lock operation

  3. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective

Note: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature

F3

Oven temperature sensor (RTD) open

Replace Oven temperature sensor (RTD)

F4

Oven temperature sensor (RTD) shorted

Replace Oven temperature sensor (RTD)

F5

Board failure

Repair control board (also called ERC or clock)

F7

Function key stuck on ERC

Repair control board (also called ERC or clock)

F8

Board failure

Repair control board (also called ERC or clock)

F9

Oven door lock failure

Check wiring to door lock switch (the wire harness may be connected wrong). Check for stuck lock switch